Multi-purpose Cable Brackets

An ideal stainless steel bracket which can be used as an end bracket, intermediate bracket, as a permanent fixture or as a quick release cable holder if access is needed behind netting.

Hilti Hangers

Zinc plated intermediate fixing for straining wire. Drill 8mm maximum. Simple hammer home fix.

Drill 8mm for Hilti fixing

Slimline Hanger

Drill 6mm for Slimline.

Hammer home and pull back to set.

Net Spike

A simple galvanised intermediate fixing. Simply drill a 5mm hole and hammer home.

Screw Pin

Stainless steel intermediate fixing.

Screw Eyes / Vine Eyes

The screw eye offers a very economical quality fixing and is available as a 100mm stainless steel vine eye, 75mm bright zinc plated vine eye, 35mm electro brassed screw eye, 45mm stainless steel screw eye and a 40mm bright zinc plated screw eye.

Split Pins & Drive Rivets

Stainless steel 316 grade split pins with grey nylon drive rivets are available in 3 sizes. Drill 6.5mm

Beam Clips

A selection of hammer-on secure intermediate fixings for straining wire or mesh panels where drilling is not an option.

Galvanised or stainless steel 316 beam clips fix to flanges of girders and beams up to 20mm thick.

Angle Brackets

25mm x 25mm zinc or 20mm x 20mm stainless steel 316.

Galvanised passivated with 7mm and 4mm diameter holes.

Slate Bracket

Stainless steel, slide between slates to hold straining wire close to roof surface.

Self Drill Screw

Available in two sizes and with BZP or Stainless Steel finish.

With hexagonal head for special drill attachment.

Net Guides

316 stainless steel intermediate fixing, low visability for use with self drill screws.